Understand the tax basis before demolition begins

Planning a Commercial Property Project?

Buying, renovating, converting, or demolishing?
Identify potential tax opportunities before making
costly decisions.

Adaptive reuse usually gets discussed as a real estate decision. Can an older office building work as a hotel? Can a vacant warehouse become something more productive? Can a tired hotel be repositioned instead of torn down?

Those are the right first questions. But there is another one that tends to get asked too late:

What happens to the tax basis already sitting inside the building?

On most conversions, the tax conversation starts when construction is finished and someone orders a cost segregation study. By then, many of the important decisions have already been made. Old components are in a dumpster, the scope of demolition is settled, and the cost records may be organized in a way that makes the tax analysis harder than it needed to be.

The point of adaptive reuse tax planning is simple: the tax strategy can start before demolition, not after construction.

This article walks through the main rules involved, in plain English, and how they fit together.

Adaptive Reuse Starts With a Building, Not an Empty Lot

A ground-up project mostly asks one tax question: what am I building?

Adaptive reuse starts with a building that already carries tax basis. Inside that basis are the structure, the electrical and plumbing systems, HVAC, ceilings, flooring, lighting, partitions, millwork, finishes and site improvements.

Some of those will stay. Some will be modified. Some will be removed entirely. Then millions of dollars of new work goes in.

So an owner converting a building really has two questions:

  • What am I taking out?
  • What am I putting in?

Each one is governed by its own set of rules, and good adaptive reuse tax planning looks at both.

What §280B Does When a Building Is Demolished

Internal Revenue Code §280B covers the demolition of a structure. When it applies, the owner (or lessee) generally cannot deduct either the cost of the demolition or the loss on the building’s remaining undepreciated basis. Instead, both amounts are added to the basis of the land. IRS Publication 551 describes the rule the same way.

That matters because land is not depreciable. Basis that lands there generally isn’t recovered until the property is sold. For more on how that plays out, see our guide to how demolition costs are treated for tax purposes, and why land value matters in cost segregation.

A simple illustration:

  • Remaining adjusted basis in the building: $3,000,000
  • Demolition costs: $750,000

If §280B applies, roughly $3,750,000 moves into land basis. It doesn’t produce a current deduction, and it doesn’t become depreciable basis in the new improvements.

Demolition or Substantial Renovation?

This is why the line between demolishing a building and substantially renovating it matters so much.

The IRS addressed that line in Revenue Procedure 95-27, which provides a safe harbor for §280B purposes. A modification of a building is not treated as a demolition if:

  • 75% or more of the existing external walls are retained in place as internal or external walls, and
  • 75% or more of the existing internal structural framework is retained in place.

The internal structural framework generally means the load-bearing elements that keep the building standing, such as load-bearing interior walls, columns, girders, beams and trusses. The revenue procedure also has an additional condition for certified historic structures.

Two cautions. First, the safe harbor answers a §280B question. Meeting it doesn’t automatically deliver every other tax result discussed in this article. Second, a project that falls outside the safe harbor is not automatically a demolition, but the answer becomes more fact-dependent and deserves careful review with the owner’s advisers.

Gutting the Interior Is Not the Same as Demolishing the Building

On a jobsite, almost everything that comes out gets called “demo.” Tax law is more specific.

Removing finishes, FF&E, flooring, ceilings, plumbing fixtures, electrical distribution, HVAC components or non-load-bearing partitions does not, by itself, mean the building has been demolished for §280B purposes. When the structure stays and its components are replaced, the analysis generally shifts to the rules for disposing of building components. That’s a very different result from sending the building’s basis into land.

The facts control here, which is exactly why the scope of work should be understood before it starts.

Partial Dispositions: What Happens to the Old Components

When a component of a building is removed and replaced, the old component may still carry undepreciated basis.

Without the right analysis, an owner can end up depreciating a roof, HVAC system or bathroom build-out that no longer exists, on a 39-year schedule, while also depreciating its replacement.

The partial disposition rules in Treasury Regulation §1.168(i)-8 address this. In appropriate circumstances, an owner can treat the retired portion of a building as disposed of and recognize a loss on its remaining adjusted basis. For many component replacements, this is an election, generally made on a timely filed original return (including extensions) for the year of the disposition. Miss that window and the opportunity may be limited. We cover the mechanics in more detail in our article on partial asset dispositions.

The treatment of removal costs is connected. Under the tangible property regulations, how the cost of removing a component is handled can differ depending on whether a disposition of that component is recognized. This is another reason to decide the approach before the work happens, not after.

Identifying the Basis of What You Remove

A partial disposition requires a number: the remaining adjusted basis of the retired component. That is often the hard part. Most acquisitions are recorded as land plus one building asset, with no detail about what’s inside.

The regulations allow a reasonable method to determine that basis when records don’t separate it. A detailed engineering-based cost segregation study performed at acquisition, or before the conversion starts, can make this far more supportable.

Before anything is removed, it’s worth asking:

  • What exactly is being removed?
  • Can we identify its original basis?
  • How much depreciation has already been taken on it?
  • What adjusted basis remains?
  • Is a partial disposition available, and does it make sense here?

Those questions belong with the owner’s CPA and other qualified advisers, based on the actual facts.

§263A in Plain English

Once the project moves from removing old property to producing new property, a different set of rules comes into play.

Section 263A contains the uniform capitalization rules, usually called UNICAP. In plain English: if a taxpayer subject to these rules produces property, including real property it builds or improves, it generally must add to that property’s basis both the direct costs of producing it and a properly allocable share of indirect costs. Those costs are then recovered through depreciation rather than deducted currently.

Section 263A(f) separately requires capitalization of certain interest incurred during the production period of real property.

There are exceptions. Section 263A(i) exempts certain smaller taxpayers that meet a gross receipts test, although entities treated as tax shelters, which can include some syndicated real estate partnerships, generally can’t use that exemption. Even outside §263A, the general capitalization rules still require many project costs to be capitalized. Whether and how §263A applies is taxpayer-specific, so it shouldn’t be assumed either way. Our deeper guide to §263A in commercial real estate walks through those rules.

The Cost of a Building Is More Than the Contractor’s Invoice

Suppose a conversion has $25 million of direct construction costs. That doesn’t mean the depreciable basis is simply the contractor’s schedule of values.

Depending on the taxpayer and the project, basis may also need to include costs such as:

  • architecture and engineering
  • construction management and supervision
  • permits and certain fees
  • certain taxes and insurance
  • project administration
  • certain interest during construction
  • other indirect costs properly allocable to the work

These costs don’t disappear when the project is cost segregated. They need to go somewhere.

Cost Segregation Should Start With Properly Determined Basis

Cost segregation classifies basis into recovery periods: shorter-life personal property, 15-year land improvements, and 39-year (or 27.5-year residential) building property. But it can only classify basis that was properly captured in the first place.

Using the same project, suppose the direct costs break down as:

  • $5 million of shorter-life property
  • $3 million of land improvements
  • $17 million of building property

Now add properly capitalized indirect costs. Those generally need to be allocated to the assets that benefited from or caused them, not dropped entirely into the 39-year building or left out. The IRS Cost Segregation Audit Techniques Guide addresses the treatment of indirect costs in this context.

Cost segregation should begin with properly determined tax basis, not merely contractor invoices. That’s the standard behind engineering-based cost segregation for commercial property.

The property type matters too. Qualified Improvement Property, which generally covers certain interior improvements to nonresidential real property placed in service after the building was first placed in service, can carry a 15-year recovery period. It excludes enlargements, elevators and escalators, and the internal structural framework. A hotel is generally nonresidential real property; an apartment building is residential rental property and isn’t eligible for QIP. So an office-to-hotel conversion and an office-to-residential conversion can produce very different classifications from similar construction work.

Why this matters even more today. Under the 2025 tax law, 100% bonus depreciation was made permanent for qualifying property generally acquired after January 19, 2025, and the IRS issued interim guidance in Notice 2026-11. Shorter-life property and eligible QIP may qualify, subject to the acquisition-date rules and other requirements, and for property the owner builds, when construction began can matter. That makes properly determining and allocating the project’s basis especially important. Classification doesn’t create the cost; it determines how properly capitalized basis may be recovered.

Adaptive Reuse Is Really Two Tax Projects

It helps to think about any conversion in two halves.

Side One: What Is Coming Out

  • What assets already exist, and what is their remaining basis?
  • What will be retained, modified or removed?
  • Does §280B apply to the work?
  • Is a partial disposition available?
  • How should removal costs be treated?

Side Two: What Is Going In

  • What new assets are being created?
  • Which direct and indirect costs must be capitalized?
  • Which improvements are building property, land improvements or shorter-life property?
  • Does QIP apply to any of the interior work?
  • What depreciation rules apply when the assets are placed in service?

Cost segregation connects the two sides. A study of the existing building helps identify the basis of what comes out. A study of the completed project classifies what went in. That’s why cost segregation timing matters as much as the study itself.

Walking Through the Example: A $20 Million Office Building Becomes a Hotel

A developer buys an older office building for about $20 million and spends about $30 million converting it into a hotel.

The easy approach is to finish the project, hand the construction costs to a cost segregation firm and calculate the depreciation. Here’s what a fuller adaptive reuse tax planning process looks like.

1. What assets are already inside the acquisition basis?
First, a supportable allocation between land and building. Then, ideally, a component-level picture of the building: structure, systems, interiors, site work.

2. What is being removed?
Office interiors, partitions, ceilings, lighting, restrooms, portions of the HVAC and electrical systems. Each has some share of that acquisition basis.

3. Does §280B apply?
If the exterior walls and structural frame largely remain, the project may fall within the modification safe harbor rather than being treated as a demolition. That should be confirmed against the actual scope before work starts.

4. Could a partial disposition apply?
If the removed components can be identified and valued, the developer and CPA can evaluate whether recognizing a loss on their remaining basis makes sense, and handle the removal costs consistently.

5. What costs must be capitalized into the new project?
Direct construction costs plus properly allocable indirect costs, possibly including construction-period interest, depending on the taxpayer.

6. How should the completed project be cost segregated?
On the full capitalized basis, with indirect costs allocated appropriately, and with the hotel’s nonresidential status considered when interior improvements are classified. Our article on hotel conversion depreciation goes further on this step.

7. Can the taxpayer actually use the resulting deductions?
This is the step that gets skipped. Passive activity rules, at-risk rules, basis limitations, the excess business loss limitation and the investor’s own situation can all affect whether a deduction helps this year, later or barely at all. The basis, at-risk and passive loss sequence explains how those limits stack.

The deduction is created at the property. Its usability is determined at the taxpayer.

Where This Matters Most

Office-to-Hotel Conversions

Systems and interiors are heavily reconfigured while the core structure usually stays. Both the disposition analysis and the QIP question can be significant.

Office-to-Residential Conversions

Large portions of the interior come out while much of the structure remains. The residential classification changes the recovery period and eliminates QIP. See our office-to-residential conversion tax considerations.

Hotel PIPs and Repositionings

Hotels replace FF&E, finishes and systems repeatedly over their lives. Each PIP is a chance to retire old basis properly instead of depreciating assets that are gone. More on tax planning for hotel PIPs.

Medical Office Redevelopment

Clinical layouts, plumbing and specialty electrical change often, and the cost of those components can be substantial. Owners planning for repeated reconfiguration may also want to look at demountable partitions and adaptable interiors.

Warehouse and Industrial Conversions

Older industrial buildings converted to other uses can involve significant site work, systems and structural decisions that affect both §280B and classification.

Historic Adaptive Reuse

Historic projects may qualify for the federal rehabilitation credit under §47, which is generally 20% of qualified rehabilitation expenditures, claimed ratably over five years. The building must be a certified historic structure, the work must meet a substantial rehabilitation test, and the credit reduces depreciable basis. These projects also carry the additional historic-structure condition in the §280B safe harbor.

The Deduction Is Not the Strategy

It’s tempting to measure a conversion’s tax planning by the size of the first-year deduction. That’s the wrong scorecard.

When a project is treated as a §280B demolition, remaining building basis and demolition costs can move into nondepreciable land basis, which is why understanding whether the work is a demolition or a substantial renovation matters before construction begins. Old components left on the books keep the depreciation schedule cluttered. Indirect costs that never make it into the classification are recovered more slowly than they should be. And a large deduction the investor can’t use isn’t worth what it looks like on paper.

The deduction is not the strategy. What the owner keeps and can redeploy is the strategy.

Why the Timing Matters

By the time the building is finished:

  • the old components are gone
  • historical cost detail is harder to reconstruct
  • the scope of demolition has been decided
  • contracts and cost reports are already structured
  • election deadlines may be approaching or past

Some of this can still be addressed later. But adaptive reuse tax planning works best early: much of it is easier, and better supported, while the building and the records are still in front of you. That means bringing the developer, architect, contractor, CPA and cost segregation engineer into the same conversation before the work begins.

Frequently Asked Questions

What does IRC §280B do when a building is demolished?

When §280B applies, the owner generally cannot deduct demolition costs or the loss on the building’s remaining undepreciated basis. Both amounts are added to the basis of the land, which is not depreciable.

Is gutting a building’s interior considered a demolition for tax purposes?

Not automatically. Under Revenue Procedure 95-27, a modification is not treated as a demolition if at least 75% of the existing external walls and 75% of the internal structural framework are retained in place. Removing interiors and systems while keeping the structure is generally analyzed under the rules for disposing of building components.

What is a partial disposition in commercial real estate?

Under Treasury Regulation §1.168(i)-8, an owner may be able to treat a retired portion of a building, such as a replaced roof or HVAC system, as disposed of and recognize a loss on its remaining adjusted basis. For many replacements this is an election made on a timely filed return for the year of disposition.

How does §263A affect the tax basis of a conversion project?

Section 263A generally requires taxpayers subject to it to capitalize direct production costs and a properly allocable share of indirect costs, such as engineering, supervision and certain construction-period interest, into the basis of property they produce. Some smaller taxpayers are exempt, so the application is fact-specific.

When should cost segregation happen on an adaptive reuse project?

Ideally on both sides of the project: a study of the existing building before work begins to identify the basis of components being removed, and a study of the completed project after the full capitalized basis has been determined.

Related Reading on Conversions and Redevelopment

Conclusion

Adaptive reuse is a construction decision, but it’s also a tax-basis decision.

§280B governs what happens when a building is demolished. The partial disposition rules affect what happens when components are removed. §263A affects which costs become part of the new property. Cost segregation classifies the result. And the taxpayer’s own situation determines what any of it is actually worth.

Those rules work best when they’re considered together, and early. That’s what adaptive reuse tax planning really means. If you’re weighing a conversion, talk through your project with Tax Logic CRE before the scope is locked.

Before tearing the building apart, understand the tax basis you may be tearing apart with it.

This article is for educational purposes only and is not tax, legal or investment advice. The application of §§280B, 263A, 168, the partial disposition rules and other provisions depends on each taxpayer’s facts and circumstances. Owners should review proposed transactions and accounting positions with their CPA, tax attorney and other qualified advisers.

Leave A Comment